Onn 4K Pro Streaming Device Remote Control

To replace the remote for your Onn 4K Pro Streaming Device streaming device, you can purchase either an original replacement remote or a compatible universal remote. Many universal remotes are designed to work with Onn devices after proper programming.

To pair a new remote with your Onn 4K Pro Streaming Device streaming device:

1. Make sure your streaming device is powered on and connected to your TV
2. Press and hold the pairing button on your new remote (usually located in the battery compartment or on the back)
3. Wait for the LED light on the remote to start flashing
4. When the remote is successfully paired, you'll see a confirmation message on your screen
5. Follow any additional on-screen instructions to complete the setup

Note: The exact pairing process may vary depending on your specific model and remote type.

If your Onn streaming device remote isn't working, try these troubleshooting steps:

1. Replace the batteries with fresh ones
2. Re-pair the remote with your streaming device
3. Check for obstructions between the remote and the device
4. Restart your streaming device by unplugging it for 30 seconds
5. Check for system updates for your device
6. If these steps don't work, you may need a replacement remote